модель	M1		M2		M3
	ZENIT 14	ZENIT 16	ZENIT 23	ZENIT25	ZENIT 30
Dump body volume (m3)	14	16	23	25	30
Volume of loading mouth (m3)	1.7	1.7	2.6	2.6	3.5
Internal load mouth width (mm)	2200	2200	2200	2200	2200
Total mass on ground (kg)	15,000 - 18,000		26,000	26,000	26,000 - 40,000
Chassis axles (n.)	2	2	3	3	4
Compaction system	Articulated single loader blade
Compaction cycle	Automatic / Continuous / Synchronised
Filling speed (m3/min)	4.5	4.5	5.5	5.5	7.5
Compaction ratio selection	Electronic from cab
Adjustable compaction ratio	From 2:1 to 6:1
Discharge system	Expulsion bulkhead
Merlin command and control system	+	+	+	+	+
Bin turn device with Shaker function	-	-	-	-	-
Bucket turn device with hydraulic stabilisers	-	-	-	-	-
Acceptance of waste from satellite vehicles	+	+	+	+	+
Rear infra-red camera with colour monitor in the cab	+	+	+	+	+
Camera for observation inside hopper	-	-	-	-	-
Rear white LED beacon	+	+	+	+	+
Flashing yellow LED beacons	+	+	+	+	+
Rear plaƞ orm for operators	-	-	-	-	-
Blade and brush holder	+	+	+	+	+
Load weighing device	-	-	-	-	-
Bin identification system	-	-	-	-	-

Dump body volume (m3)	5.5	3.2
Total mass on ground (kg)	6500 - 9000
Discharge system	By means of dump body tip-up
Unloading into larger compactors	+	+

Dump body volume (m3)	7.2
Waste container dump body	Single body structure
Recommended set-ups on chassis with T.M.G (total mass on ground)	7000 ÷ 8500 kg
Compaction system	Simple, progressive loader

Dump body volume (m3)	2.2
Total mass on ground (kg)	From 1500 to 1700
Discharge system	By means of dump body tip-up
Unloading into compactors with universal aperture	+

Dump body volume (m3)	5.5
Total mass on ground (kg)	3500 - 5200
Compaction system	Articulated single loader blade
Compaction cycle	Manual / automatic / synchronised

Dump body volume (m3)	5
Total mass on ground (kg)	3,500
Discharge system	+
Unloading into compactors with universal aperture	+

Онлайн заказ